[Jud_T]

Houses on golf courses, that's so 2006......

[Ally Mcintosh]

Ally:

No, there are many US architects who insist on a corridor of 400 feet wide (133 yards) if there are to be houses on both sides.  300 feet (100 yards) is sort of the minimum standard, but Nicklaus and Fazio won't take one of those jobs.  (Or maybe they would in 2010!)

Tom, I agree with that... The standards Robin (and I) was talking about would be 120 metres (i.e. 133 yards) in the case where a hole was running between two external boundaries... So the same as you state...

I think Sean is visualising a hole corridor in the middle of a golf course where barriers are less... In the recommendations that Robin states, that would effectively be 60 metres (66 yards) wide...

Still, I think each case should be taken on individual merit...

[Adrian_Stiff]

Sean I misunderstood it as well. 70 yards is my yardstick, though as mentioned angles can hep things, plus we are talking UK..we dont really have houses or cart paths..usually field or woodland. I have just buit one course with 3 holes in 180 yard width...its very squeezed, I have a doube fairway on two of them very rumpled but kept everything visible. Sean one year you will pop down.  

[Robin_Hiseman]

Tom:

Absolutely, that would be along the lines of the minimum for a single corridor hole between real estate.

I must confess to having designed in a few 160 metre wide single hole corridors on one project, just so I could get some strategic variety into the design.  The developer didn't know any better!  120 metres (130 yards) limits what you can do with the strategy, as you don't have much room to create strong angles of play/offset fairways.  

I'm not going to preach to my American friends about this.  Just looking at an aerial of Palm Springs tells me that you have far more experience of how tight things can be than I have.

[Ally Mcintosh]

As an aside, I shouldn't be calling them standards... They are recommendations...

[Sean_A]

Tom:

Absolutely, that would be along the lines of the minimum for a single corridor hole between real estate.

I must confess to having designed in a few 160 metre wide single hole corridors on one project, just so I could get some strategic variety into the design.  The developer didn't know any better!  120 metres (130 yards) limits what you can do with the strategy, as you don't have much room to create strong angles of play/offset fairways.  

I'm not going to preach to my American friends about this.  Just looking at an aerial of Palm Springs tells me that you have far more experience of how tight things can be than I have.

Robin

I see, so this 130 yard business is for boundary holes?  What sort of width is the "standard" for interior holes (holes which don't have boundary issues)?   

Ciao

[Jud_T]

Kalen,

You'd also need one of these:

[Ally Mcintosh]

Tom:

Absolutely, that would be along the lines of the minimum for a single corridor hole between real estate.

I must confess to having designed in a few 160 metre wide single hole corridors on one project, just so I could get some strategic variety into the design.  The developer didn't know any better!  120 metres (130 yards) limits what you can do with the strategy, as you don't have much room to create strong angles of play/offset fairways.  

I'm not going to preach to my American friends about this.  Just looking at an aerial of Palm Springs tells me that you have far more experience of how tight things can be than I have.

Robin

I see, so this 130 yard business is for boundary holes?  What sort of width is the "standard" for interior holes (holes which don't have boundary issues)?  

Ciao

65 yards Sean... i.e. 130 yards between the centrelines of the hole to the left and the hole to the right... See my sardine analogy above...

[Kalen Braley]

Kalen,

You'd also need one of these:

Ahh yes...an obvious oversight on my part!! 

[Robin_Hiseman]

Sean:

60m from the centre of one fairway to the centre of a fairway running parallel to it. 

[Tags:]

Tags:

[Tags:]

Tags:

Call to undefined function theme_linktree()