If you wanna link images from a site like photobucket you need to do the following:
First and foremost, any image on the world wide web has an address affiliated with it.
this address is going to start with http:// and usually end with .jpg
That is, of course, if the image is a jpg, and there are many other TYPES of image files.
But .jpg are the most popular.
So, take an image from this very website as an example. If I right click on the image from the homepage and select properties, we will see that the address of this image is
http://golfclubatlas.com/wp-content/uploads/2008/09/prestwick13.jpgNow, in order to make the image viewable within a thread, you have to put TAGS around it. These tags consist of the [ ] characters. So, surround the letters img with the square brackets before the address of your image, and then surround the letters /img with the square brackets BEHIND the address of your image
In other words, you must enter this line of text in the thread
{img}http://golfclubatlas.com/wp-content/uploads/2008/09/prestwick13.jpg{/img} except use the square brackets not the ones I just used.
Do it correctly and you'll get this: