Excuse me while I brush the dust off my pants. Was just out there again, preparing for Tim Liddy's visit next Thursday. Laid out the little red construction flags and sent digitals to Liddy who is monitoring what shaper Phil Coles (he did the golf course in 2002-2003) is working on.
Basically, adding width to the par-3 tees, and in the process sneaking in about 80 more yards to get it to 6,710, par-70. Nothing more.
Changes as follows:
3rd hole, 162-yard par-3, adding 3,000 sq. ft. to the tee w/o changing length, and enabling the shared tee with hole 6 to get pushed back about 25 yards so that it plays 420 yards.
6th tee - see above, going from 395 to 420.
7th hole, downhill par-3, currently 222 from back, will go to 250 as we expand tee behind and put more intemediary tees so that effective teeing ground is about 2x. Shot is to largest green on course, and whole right side and approach are open, so from back tees it is still readily manageable.
9th hole, par-3, going from about 165 to 190 as we add about 1,800 square feet of teeing ground behind and to right.
Theory here is you can't have to much teeing area on par-3 and we had too little.
12th hole, 167 yards, doubling teeing area to the right with no change of yardage.
Superintendent Greg Dubois is doing an amazing job. We'll do almost 900 rounds this week, everyone else in town is slow if not virtually closed, and the work is proceeding w/o interruption of play.